Programming the eZ430-Chronos Wrist Module: Disassembly and Assembly of the Housing
4.
Remove the battery before connecting the module to the emulator. Place the screwdriver tip between
the battery and the battery holder (small metal tab) and push the tab away from battery (see
). Detailed instructions are shown in the eZ430-Chronos Disassembly and Assembly video on
.
Figure 4-2. Remove Chronos Module Battery
CAUTION
To prevent the battery from being charged, always remove the battery from the
enclosure before connecting the Chronos module to an emulator.
WARNING
Properly dispose of the battery. Keep the battery out of the reach
of children. If the battery is swallowed, contact a physician
immediately.
57
SLAU292F – November 2009 – Revised October 2013
eZ430-Chronos Hardware
Copyright © 2009–2013, Texas Instruments Incorporated