6.5.14
Removing/Replacing the Power Supply
Board Assembly
To remove and replace the Power Supply Board Assembly, perform the following
procedure:
1
.
Remove the Top Case Assembly as described in paragraph 6.5.10.
2
.
Remove the metal shield that covers the Power Supply Board.
3
.
Using a plastic stick, lift up on the end of the board that is adjacent to the
processor. The board assembly snaps out. Remove board from unit.
4
.
Replacement is essentially the reverse of steps 1 through 3 above.
6.5.15
Removing/Replacing the Memory Board
To remove and replace the Memory Board Assembly, perform the following
procedure:
1
.
Remove the AC Adapter, Battery Pack, Hard Disk Drive and Floppy Disk Drive
from the unit.
Figure 6-8 Power Supply Board Removal
Field Service 6-15
Summary of Contents for Extensa 450 Series
