Texas Instruments DS160PR810EVM-RSC User Manual Download Page 2 | Manualshive

Page: 2 / 33

Texas Instruments DS160PR810EVM-RSC User Manual Download Page 2

2.8 DS160PR810EVM Downstream Devices Control..............................................................................................................

2.9 DS160PR810EVM Upstream Devices Control..................................................................................................................

2.10 Quick-Start Guide (Pin Mode)........................................................................................................................................

2.11 Quick-Start Guide (SMBus Slave Mode)........................................................................................................................

3 Test Setup and Results

........................................................................................................................................................

4 Schematics

............................................................................................................................................................................

5 Board Layout

.........................................................................................................................................................................

6 Bill of Materials

.....................................................................................................................................................................

7 References

............................................................................................................................................................................

Trademarks

All trademarks are the property of their respective owners.

1 Introduction

The DS160PR810EVM-RSC evaluation module features four DS160PR810 linear redrivers that can extend the
transmission distance of a PCIe Gen-4 x16 bus. It can directly be plugged into a PCIe slot on a server or PC
motherboard using one end of the board, and paired up with a PCIe add-in card using the straddle mount
connector attached to the other end of the board.

1.1 Features

• PCIe x16 Riser Card option with four 8-channel unidirectional linear redrivers operating at rates up to 25

Gbps

• Linear equalization for seamless support of link training and PCIe channel extension
• CTLE boosts up to 18 dB at 8 GHz
• Programmable device configuration through GPIO or I2C, SMBus
• Onboard 12-V to 3.3-V, 2-A step-down DC/DC converter
• Industrial temperature range: –40°C to 85°C
• Flow-through layout in 5.5 mm × 10 mm, 64-pin, leadless WQFN 0.4-mm pitch package

1.2 Applications

• PCI Express Gen-1, 2, 3, and 4
• High-speed interfaces up to 25 Gbps
• Enterprise server motherboard, workstation
• Enterprise storage
• Enterprise add-in card, end-point

Trademarks

2

DS160PR810EVM-RSC Evaluation Module (EVM)

SNLU273 – DECEMBER 2020

Submit Document Feedback

Copyright © 2020 Texas Instruments Incorporated

«
1
2
3
4
...
»

Summary of Contents for DS160PR810EVM-RSC


































Reviews:

No comments