Texas Instruments DRV8329AEVM, User Manual, Page: 12 / 24

Table 4-2. User-Selectable Jumpers (continued)
Id. Setting Name Description Position Function
M External CSA output filter RC output filter to
suppress high frequency
transients of CSA output
from current shunt. R59 = 330 ohms, C31 =
470 pF F c ~10 MHz
N DRVOFF switch Turns off the gate driver
outputs. S2 = Down Drivers are on
S2 = Up Drivers are off (DRVOFF
is enabled)
Figure 4-6. User-adjustable jumpers, resistors, and switches on DRV8329AEVM
4.4.1 DRV8329A/B Compatibility
The DRV8329AEVM default is the DRV8329A (Hardware variant), but can also be compatible with the
DRV8329B. The main difference is that DRV8329A operates in 6x PWM mode and DRV8329B operates in
3x PWM mode. To use the DRV8329B, remove the DRV8329A from the EVM and replace with the DRV8329B.
No extra hardware changes are required for 3x PWM operation.
4.5 Interfacing DRV8329AEVM and LAUNCHXL-F280049C LaunchPad
The DRV8329AEVM has 40 pins with different functions. These pins are interfaced with the LAUNCHXL-
F280049C LaunchPad development kit and are mapped appropriately to receive the functionalities of the
DRV8329 device. These 40 pins are grouped into 4 ports in respect to the LAUNCHXL-F280049C (J1 to J4).
Table 4-3 and Table 4-4 list the interfacing of these ports of the DRV8329AEVM headers J3 and J4.
Table 4-3. Connections for Header J1 on DRV8329AEVM (DNP in bold)
J3 Pin Number DRV8329AEVM Function LAUNCHXL-F280049C Function Description
1 AVDD (DNP) +3.3 V 3.3 V LaunchPad Supply
2 +5 V +5 V 5 V LaunchPad Supply
Hardware and Software Overview www.ti.com
12 DRV8329AEVM User’s Guide SLVUCF5 – MARCH 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated