
5 Firmware and GUI Application
The DRV8328AEVM can implement sensored, sensorless, or Field-oriented control for commutating a 3-phase
Brushless-DC motor. The GUI for the DRV8328AEVM supports sensored trapezoidal commutation using Hall
sensor feedback and allows for basic trapezoidal motor control functions such as acceleration, duty cycle
control, PWM switching frequency, MCU dead time insertion, braking, and direction changes. The bus and phase
voltage feedback circuits as well as the external CSA provide voltage and current feedback from the motor for
over-current and motor voltage protection.
There are two versions of the GUI. The DRV8328A_DRV8328C_EVM_GUI only supports the “A” and "C"
versions of the DRV8328, and the DRV8328B_DRV8328D_EVM_GUI only supports the "B" and "D" versions of
the DRV8328.
Variant
GUI
DRV8328A
DRV8328B
DRV8328C
DRV8328D
To access the GUIs, please visit
https://dev.ti.com/gallery/search/drv8328
. You must register a TI account in
order to access the Gallery.
5.1 Connecting to the DRV8328xEVM GUI
and ensure the LAUNCHXL-F280049C is connected to the PC. Turned on
the supply to power the DRV8328AEVM and LAUNCHXL-F280049C.
Access the
and search for "DRV8328" as shown in
the GUI depending of the DRV8328 variant configured on the EVM. If using the DRV8328AEVM out of the box,
select the DRV8328A_DRV8328C_EVM_GUI tile on the left.
Figure 5-1. DRV8328AEVM GUI tiles in the Gallery for A, B, C, and D variants
Accept the readme that appears. The GUI will detect the LAUNCHXL-F280049C and automatically download the
program into the MCU. Once complete, the “Hardware Connected” message appears at the bottom left hand
corner as shown in
.
Firmware and GUI Application
SLVUCD3A – NOVEMBER 2021 – REVISED AUGUST 2022
DRV8328xEVM User's Guide
15
Copyright © 2022 Texas Instruments Incorporated