Texas Instruments DRV8316 EVM Series, User Manual

Page: 6 / 28

4 Hardware and Software Overview
4.1 LEDs, Switches, and Jumpers
There are LED indicators on both the LAUNCHXL-F280049C and DRV8316xEVM when power is provided.
The LAUNCHXL-F280049 LaunchPad LEDs power up when the Micro-USB cable is plugged in and their
functionalities are not modified upon powering the board.
The DRV8316xEVM has four status LEDs implemented on the board. By default, the VM and 3.3-VBK LEDs
will light up when the board is powered and the MCU LED (tied to GPIO59) can be used for debugging and
validation.
Table 4-3 shows LED descriptions including those that are on during power up in bold and Figure 4-1
shows the locations of the LEDs.
Table 4-1. Description of DRV8316xEVM LEDs (default Upon powerup in bold)
Designator Name Color Description
D1 3.3VBK Green Internal buck regulator is outputting
3.3 V
D2 nFAULT Red Lights up when fault condition has
occurred on DRV8316
D3 VM Green Power is supplied to the board
D4 MCU_LED Orange MCU debugging
Hardware and Software Overview www.ti.com
6 DRV8316xEVM Evaluation Module SLVUBZ9B – DECEMBER 2020 – REVISED AUGUST 2021
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated