T
I C
o
n
fid
e
n
tial
–
N
D
A
R
e
s
tr
ictio
n
s
Programming the MSP430
9
Programming the MSP430
9.1
Bootstrap Loader Method
The following items are required to program the board using the bootstrap loading (BSL) method:
•
Mini USB cable
•
MSP430 USB firmware upgrade which is found in the MSP430 USB developers package
(
www.ti.com/tool/msp430usbdevpack
)
•
Code Composer Studios (CCS)
Use the following steps to program the board using the BSL method:
1. Open the firmware project in CCS and go to the build menu of the properties window as shown in
2. Under the
Steps
tab of the build menu and in the
Apply Predefined Step
drop-down, select
Create
flash image: TI-TXT
as shown in
Figure 12. CCS Create Flash Image
3. Rebuild the project. The text image file can be found in debug folder with the name AIP032.txt
4. Hold the BSL button on the DRV2605LEVM-MD and connect the EVM to the computer through the
USB mini cable to initiate it as a USB device.
5. Open up the MSP430 USB Firmware Uploader. If it does not say
ready
on the screen then retry the
BSL powerup sequence again.
6. Go to
file
and select
open user firmware
to locate the text image file (
shows an example
of a successful firmware update process).
7. Cycle the power on the board to restart the firmware.
13
SLOU400 – September 2014
DRV2605L Multi-Driver ERM, LRA Haptic Driver Evaluation Kit User’s Guide
Copyright © 2014, Texas Instruments Incorporated
