Texas Instruments DRV2603, User Manual

Page: 3 / 28

Actuators
DRV2603
MSP430
OUT
U
S
B
V
B
A
T
S
B
W
MSP
DRV
USB Power
External
Power
Power Select Pins
DRV2603 Driver Increment Mode
Decrement Mode ERM and LRA Actuators
Effect Buttons
Press to play haptic effects.
Programmer
Connector
www.ti.com
Getting Started
4 MSP430 Pin-Out
...........................................................................................................
16
1 Getting Started
The DRV2603 can be used as a demonstration or evaluation tool. When the DRV2603EVM-CT Evaluation
Module is powered on, a demo application automatically starts. To power the board, connect the
DRV2603EVM-CT to an available USB port on your computer using the included mini-USB cable. The
demo begins with a board power-up sequence and then will enter the demo effects mode. The four larger
buttons (B1-B4) can be used to sample haptic effects using both the ERM and LRA motor in the top right
corner. The two smaller mode buttons (“–“, “+”) are used to change between the different sets of effects.
See the
DRV2603 Demonstration Program section for a more detailed description of the demo application.
Figure 1. Board Diagram
3 SLOU340A – May 2012 – Revised May 2012 DRV2603 ERM/LRA Haptic Driver Evaluation Kit
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated