www.ti.com
DRV10974 Onboard Connections
7
SLVUB95C – December 2017 – Revised August 2018
Submit Documentation Feedback
Copyright © 2017–2018, Texas Instruments Incorporated
DRV10974 Evaluation Module
4
DRV10974 Onboard Connections
4.1
Connector (P1) for Power Input
The DRV10974 device requires an external power supply (4.4 V to 18 V) to operate. Connector P1
provides the required interface for the external power supply. The pin assignment of terminal P1 is as
follows:
Figure 5. Power Input Terminal Block (P1)
(1)
Note that terminal 1 is denoted by the small, silkscreened rectangle
on the board at the right side of the terminal block.
Table 1. Connector P1: 2-Terminal Connector to
Connect Power
TERMINAL
DESCRIPTION
1
(1)
V
CC
2
GND
