Texas Instruments DLP LightCrafter, User Manual

Page: 23 / 68

www.ti.com
Connecting to a PC
Figure 2-9. Windows 7 Update Driver Software Select Network Driver Window
8. Click "Close" after the software updates. See Figure 2-10 .
Figure 2-10. Windows 7 Update Driver Software Successfully Updated Window
2.2.3 Enabling the RNDIS Driver on Linux
DLP LightCrafter connects to Linux systems as a Linux-USB Ethernet/RNDIS device. Some systems
require USB networking support to be manually enabled. To enable USB networking follow these steps:
1. Open a command terminal.
2. Open the "/etc/network/interfaces" file in superuser mode. See Figure 2-11 .
• For example, "sudo gedit /etc/network/interfaces"
3. Add "iface usb0 inet dhcp" to the file. See Figure 2-11 .
23 DLPU006C – January 2012 – Revised December 2013 Operating the DLP LightCrafter
Submit Documentation Feedback
Copyright © 2012–2013, Texas Instruments Incorporated