Audio
Interface
Projector
ON/OFF
Switch
HDMI
Connector
5V Power
Connector
DLP
LightCrafter™
Display Board
Connector
USB
Connector
EVM Setup
www.ti.com
7
EVM Setup
The DLP LightCrafter Display 3010 EVM is composed of three parts:
•
Main board
•
DLP LightCrafter Display board
•
Engine with LED connection and Flex cable
The main board contains the connector for the power supply, a USB connector to communicate to the
DLP LightCrafter™ Display software, HDMI, audio and the connector for the DLP LightCrafter™Display
board. The main board also contains a switch to turn on the projector in case the DLP LightCrafter™
Display board and the engine are connected.
Figure 5
shows the main connectors on the main board.
Figure 5. DLP LightCrafter Display main board
The DLP LightCrafter™ Display board has three main connectors: the LED connector, the Flex cable
connector, and the main board connector. To connect the main board to the DLP LightCrafter™ Display
board, refer to
Figure 6
. Note that the main board connector on the DLP LightCrafter™ Display board is
on the bottom while the LED and Flex cable connectors are on the top.
8
DLP
®
LightCrafter™ Display 3010 EVM User’s Guide
DLPU029A – October 2014 – Revised January 2015
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated