DLP
®
LightCrafter™ Display 3010 EVM Overview
www.ti.com
1
DLP
®
LightCrafter™ Display 3010 EVM Overview
This user’s guide presents an overview of the DLP LightCrafter Display 3010 evaluation module (EVM)
and a general description of the main features and functions. It will explain the first steps to get started,
shows a detailed description of the push buttons function, the on board LEDs and the main connectors. It
will give the user a successful start with his first DLP LightCrafter Display 3010 evaluation module.
Figure 1. DLP LightCrafter Display complete EVM
In addition to this document, the following documents shown in
Section 2
should be used.
2
Applicable Documents
The following documents are applicable to the DLP LightCrafter™ Display 3010 EVM and are available at
TI.com
www.ti.com
.
•
DLP3010 (.3 720p) DMD data sheet, TI literature number
DLPS051
•
DLPC3438 controller data sheet, TI literature number
DLPS035A
•
Software Programmer's Guide, TI literature number
DLPU020A
•
DLP LightCrafter Display EVM GUI Tool User's Guide, TI literature number
DLPU021
If you need assistance refer to the
DLP and MEMS TI E2E community support forums. forums.
LightCrafter is a trademark of Texas Instruments.
DLP is a registered trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
2
DLP
®
LightCrafter™ Display 3010 EVM User’s Guide
DLPU029A – October 2014 – Revised January 2015
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated
