www.ti.com
Hardware Setup
5
SBOU191 – July 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
DIYAMP-SOT23-EVM
2.2
EVM Assembly Instructions
This section has step-by-step instructions on how to assemble a circuit configuration from the EVM.
Step 1.
Choose the desired circuit configuration. See
Section 2.1
for the location of each circuit
configuration.
Step 2.
Gently flex the PCB panel at the score lines to separate the desired circuit configuration from
the EVM.
Figure 2. Detach Desired Circuit Configuration
Step 3.
Solder device and surface mount passive components to the separated PCB.
Figure 3. Detach Configuration With Attached IC and Passive Components
Step 4.
Use long-nose pliers to break header strips, provided in the EVM kit, into 4-position lengths.
Figure 4. Terminal Strip (TS-132-G-AA) Broken Into 4-Pin Lengths