Texas Instruments DAC8775EVM, User Manual, Page: 5 / 20

www.ti.com
EVM Hardware Overview
5 SBAU248 – November 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DAC8775EVM User’s Guide
Table 3. EVM Jumper Summary (continued)
JUMPER LABEL DEFAULT POSITION FUNCTION
JP21 Not installed
Installed Loads VOUTA/IOUTA with a 1-k Ω resistor
Not installed Unloads VOUTA/IOUTA the 1-k Ω resistor
JP22 Not installed
Installed Loads VOUTB/IOUTB with a short to GND
Not installed Unloads VOUTB/IOUTB of the short to GND
JP23 Not installed
Installed Loads VOUTB/IOUTB with a 250-
Ω
resistor
Not installed Unloads VOUTB/IOUTB of the 250- Ω resistor
JP24 Not installed
Installed Loads VOUTB/IOUTB with a 625- Ω resistor
Not installed Unloads VOUTB/IOUTB of the 625- Ω resistor
JP25 Not installed
Installed Loads VOUTB/IOUTB with a 1-k
Ω
resistor
Not installed Unloads VOUTB/IOUTB the 1-k
Ω
resistor
JP26 Installed
Installed VSENSENA is shorted to GND onboard
Not installed VSENSENA is shorted to GND off-board
JP27 Installed
Installed VSENSENB is shorted to GND onboard
Not installed VSENSENB is shorted to GND off-board
JP28 Installed
Installed When HARTIN_A is not in use, AC couple to GND
Not installed When HARTIN_A is in use, disconnect from GND
JP29 Installed
Installed When HARTIN_B is not in use, AC couple to GND
Not installed When HARTIN_B is in use, disconnect from GND
JP30 Installed
Installed VSENSEPC is shorted to VOUTA onboard
Not installed VSENSEPC is shorted to VOUTA off-board
JP31 Installed
Installed VSENSEPD is shorted to VOUTB onboard
Not installed VSENSEPD is shorted to VOUTB off-board
JP32 Not installed
Installed Loads VOUTC/IOUTC with a short to GND
Not installed Unloads VOUTC/IOUTC of the short to GND
JP33 Not installed
Installed Loads VOUTC/IOUTC with a 250-
Ω
resistor
Not installed Unloads VOUTC/IOUTC of the 250- Ω resistor
JP34 Not installed
Installed Loads VOUTC/IOUTC with a 625- Ω resistor
Not installed Unloads VOUTC/IOUTC of the 625- Ω resistor
JP35 Not installed
Installed Loads VOUTC/IOUTC with a 1-k
Ω
resistor
Not installed Unloads VOUTC/IOUTC the 1-k
Ω
resistor
JP36 Not installed
Installed Loads VOUTD/IOUTD with a short to GND
Not installed Unloads VOUTD/IOUTD of the short to GND
JP37 Not installed
Installed Loads VOUTD/IOUTD with a 250- Ω resistor
Not installed Unloads VOUTD/IOUTD of the 250-
Ω
resistor
JP38 Not installed
Installed Loads VOUTD/IOUTD with a 625-
Ω
resistor
Not installed Unloads VOUTD/IOUTD of the 625- Ω resistor
JP39 Not installed
Installed Loads VOUTD/IOUTD with a 1-k Ω resistor
Not installed Unloads VOUTD/IOUTD the 1-k Ω resistor
JP40 Installed
Installed VSENSENC is shorted to GND onboard
Not installed VSENSENC is shorted to GND off-board
JP41 Installed
Installed VSENSEND is shorted to GND onboard
Not installed VSENSEND is shorted to GND off-board
JP42 Installed
Installed When HARTIN_C is not in use, AC couple to GND
Not installed When HARTIN_C is in use, disconnect from GND
JP43 Installed
Installed When HARTIN_D is not in use, AC couple to GND
Not installed When HARTIN_D is in use, disconnect from GND