Texas Instruments DAC53701EVM, User Manual, Page: 14 / 38

3.2 Software Description
This section describes the features of the DAC53701 EVM software, and discusses how to use these features.
The software provides basic control of all the registers and functions to the DAC53701 device.
3.2.1 Starting the Software
To launch the software, locate the Texas Instruments folder in the All Programs menu, and select the DAC53701
EVM icon.
Figure 3-3. DAC53701EVM GUI Location
Figure 3-4 shows that if the Analog EVM Connector is connected correctly, the status bar at the bottom of the
screen displays Hardware Connected . If the Analog EVM Controller is not properly connected or not connected
at all, the status bar displays Hardware not connected . In case the Hardware not connected status persists even
after the hardware is connected, go to Options → Serial Port , and change the port to the other available port with
the (Texas Instruments) or ACCtrl tag. Out of the two ports with these tags, one port should connect.
Figure 3-4. DAC53701EVM GUI Connection Detection
Detailed Description www.ti.com
14 DAC53701EVM SLAU841 – OCTOBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated