Texas Instruments CDCE6214-Q1EVM, User Manual, Page: 2 / 27

2 SNAU244 – July 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Contents
Contents
Preface
........................................................................................................................................
3
1 Quick Start
..........................................................................................................................
4
1.1 Install TICS Pro Software and Select Device
............................................................................
4
1.2 Connect the EVM to PC
....................................................................................................
4
1.3 Configure Jumpers
..........................................................................................................
5
1.4 Scan I2C Bus
.................................................................................................................
6
1.5 Load Default and Check Lock Status
.....................................................................................
7
1.6 Check Outputs
...............................................................................................................
8
2 Modes of Operations
............................................................................................................
9
2.1 Input Configuration
..........................................................................................................
9
2.1.1 Input Selection
......................................................................................................
9
2.1.2 Crystal Input
........................................................................................................
10
2.2 PLL Configuration
..........................................................................................................
10
2.3 SSC, DCO and ZDM Modes
..............................................................................................
10
2.4 Output Configuration
.......................................................................................................
10
2.5 1.8-V and 3.3-V Power Supply
...........................................................................................
11
3 Frequently Asked Questions - FAQ
.......................................................................................
12
3.1 USB2ANY Cannot Be Detected By TICS Pro
..........................................................................
12
3.1.1 Identify USB2ANY
.................................................................................................
12
3.1.2 Upgrade USB2ANY Firmware
...................................................................................
12
3.2 How to Use External Microcontroller
.....................................................................................
13
3.2.1 Use 3.3-V Power Supply and Configure Jumpers
............................................................
13
3.2.2 Connect SDA, SCL, and GND to USB2ANY
..................................................................
14
4 Schematic and Layout
........................................................................................................
15
4.1 Schematic
...................................................................................................................
15
4.2 Layout
........................................................................................................................
23