– Or, the antenna separation distance and MPE compliance requirements for all simultaneous transmitting
antennas have been specified in the application filing of at least one of the certified transmitters within
the host device. In addition, when transmitters certified for portable use are incorporated in a mobile host
device, the antennas must be greater than 5 cm from all other simultaneous transmitting antennas.
• All antennas in the final product must be at least 20 cm from the users and nearby persons.
10.3 EU Certification and Statement
10.3.1 RF Exposure Information (MPE)
This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. To comply with the
RF exposure requirements, this module must be installed in a host platform that is intended to be operated in a
minimum of 20-cm separation distance to the user.
10.3.2 Simplified DoC Statement
10.3.2.1 CC2564MODN Module
Hereby, Texas Instruments declares that the radio equipment type CC2564MODN is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available
.
10.3.2.2 CC2564MODNEM
Hereby, Texas Instruments declares that the radio equipment type CC2564MODNEM is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available
.
10.3.3 Waste Electrical and Electronic Equipment (WEEE)
Waste Electrical and Electronic Equipment (WEEE)
This symbol means that according to local laws and regulations your
product or battery shall be disposed of separately from household
waste. When this product reaches the end of life, take it to a
collection point designated by local authorities. Proper recycling of
your product will protect human health and the environment.
10.3.4 OEM and Host Manufacturer Responsibilities
OEM and Host manufacturers are ultimately responsible for compliance of the host and module. The final
product must be reassessed against all the essential requirements of the RED before it can be placed on the
EU market. This includes reassessing the transmitter module for compliance with the Radio and EMF essential
requirements of the RED. This module must not be incorporated into any other device or system without
retesting for compliance as multi-radio and combined equipment.
10.3.5 Antenna Specifications
In all cases, assessment of the final product must be met against the essential requirements of the RE Directive
Article 3.1(a) and (b), safety and EMC respectively. As well as any relevant Article 3.3 requirements.
• The LTA-5320-2G4S3-A1 (-1.31 dBi) was verified in the conformity testing, and for compliance the antenna
shall not be modified. A separate approval is required for all other operating configurations, including different
antenna configurations.
• If any other simultaneous transmission radio is installed in the host platform together with this module, or
above restrictions cannot be kept, a separate RF exposure assessment and CE equipment certification is
required.
Manual Information to the End User
SWRU390A – AUGUST 2014 – REVISED AUGUST 2021
Dual-Mode Bluetooth
®
CC2564 Module Evaluation Board
21
Copyright © 2021 Texas Instruments Incorporated