10.2.4 End Product Labeling
This module is designed to comply with the FCC statement, FCC ID: Z64-2564N. The host system using this
module must display a visible label indicating the following text:
• Contains FCC ID: Z64-2564N
This module is designed to comply with the IC statement, IC: 451I-2564N. The host system using this module
must display a visible label indicating the following text:
• Contains IC: 451I-2564N
10.2.5 Device Classifications
Since host devices vary widely with design features and configurations, module integrators shall follow the
guidelines below regarding device classification and simultaneous transmission. Module integrators will also
seek guidance from their preferred regulatory test lab to determine how regulatory guidelines will impact the
device compliance. Proactive management of the regulatory process will minimize unexpected schedule delays
and costs due to unplanned testing activities.
The module integrator must determine the minimum distance required between their host device and the user's
body. The FCC provides device classification definitions to assist in making the correct determination.
Note
These classifications are only guidelines; Strict adherence to a device classification may not satisfy
the regulatory requirement, as near-body device design details may vary widely. Your preferred test
lab will be able to assist in determining the appropriate device category for your host product and if a
KDB or PBA must be submitted.
Note
The module you are using has been granted modular approval for mobile applications. Portable
applications may require further RF exposures (SAR) evaluations. It is also likely that the host
and module combination will need to undergo testing for FCC Part 15 regardless of the device
classification. Your preferred test lab will be able to assist in determining the exact tests which are
required on the host and module combination.
10.2.6 FCC Definitions
Portable: (§2.1093)
– A portable device is defined as a transmitting device designs to be used so that the
radiating structure(s) of the device is / are within 20 cm of the body of the user.
Mobile: (§2.1091) (b)
– A mobile device is defined as a transmitting device design to be used in other than fixed
locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally
maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. Per
§2.1091d (d)(4) in some cases (for example, modular or desktop transmitters), the potential conditions of use of
a device may not allow easy classifications of that device as either Mobile or Portable. In these cases, applicants
are responsible for determining minimum distances for compliance for the intended use and installation of the
device based on evaluation of either specific absorption rate (SAR), field strength, or power density, which is
most appropriate.
10.2.7 Simultaneous Transmission Evaluation
This module has not been evaluated or approved for simultaneous transmission as it is impossible to determine
the exact multi-transmission scenario that a host manufacturer may choose. Any simultaneous transmission
condition established through module integration into a host product must be evaluated per the requirements in
KDB447498D01(8) and KDB616217D01,D03 (for laptop, notebook, netbook, and tablet applications).
These requirements include, but are not limited to:
• Transmitters and modules certified for mobile or portable exposure conditions can be incorporated in mobile
host devices without further testing or certifications when:
– The closest separation among all simultaneous transmitting antennas is greater than 20 cm.
Manual Information to the End User
20
Dual-Mode Bluetooth
®
CC2564 Module Evaluation Board
SWRU390A – AUGUST 2014 – REVISED AUGUST 2021
Copyright © 2021 Texas Instruments Incorporated