Texas Instruments BQ79606EVM, User Manual, Page: 10 / 35

Connectors
www.ti.com
10 SLOU471E – May 2017 – Revised April 2019
Submit Documentation Feedback
Copyright © 2017–2019, Texas Instruments Incorporated
BQ79606A-Q1 Evaluation Module
Table 7. Pin Description - J15
Pin Name Comments
1 GPIO1 Tied to J16 Pin 1
2 GPIO2 Tied to J16 Pin 3
3 GPIO3 Tied to J16 Pin 5
4 GPIO4 Tied to J16 Pin 7
5 GPIO5 Tied to J16 Pin 9
6 GPIO6 Tied to J16 Pin 11
3.1.4 High-Side and Low-Side Communications
There are two sets of 4-position molex connectors available on each board. These provide high-side (J6)
and low-side (J5) communications between stacked EVM devices.
Table 8. Connector Information
Designator Manufacturer Part Number Mating Connector
J5/J6 Molex Manufacturer:
0705510038
Digi-Key: WM14059-ND
Manufacturer:
0050579404
Digi-Key: WM2902-ND
Table 9. Pin Description - J5
Pin Name Comments
1 COML_N COM lowside negative
2 COML_P COM lowside positive
3 FAULTL_N FAULT lowside negative
4 FAULTL_P FAULT lowside positive
Table 10. Pin Description - J6
Pin Name Comments
1 FAULTH_P FAULT highside positive
2 FAULTH_N FAULT highside negative
3 COMH_P COM highside positive
4 COMH_N COM highside negative