![background image](http://html.mh-extra.com/html/texas-instruments/bq79606a-q1/bq79606a-q1_user-manual_1097087022.webp)
Faults
22
SLUUBQ2C – July 2017 – Revised April 2019
Copyright © 2017–2019, Texas Instruments Incorporated
Getting Started with the BQ79606A-Q1 GUI
9
Faults
A “Read” displays a list of device addresses, and faults associated with each device which can be seen in
Once “Read” is pressed, all devices are shown on the left side of the GUI, along with an overview of the
major faults on each device. Pressing “Show All” next to a device provides all faults for that device, in
detail, on the right side of the GUI. Here, each fault register address and value is provided. Each fault can
be masked, unmasked, or reset on the right side of the GUI by pressing the corresponding checkbox, the
using the “Write All” command at the top of the GUI.
Figure 29. Fault Summary
10
Status
A “Read” displays a list of device addresses, and the status register for each device as shown in
The Status tab provides an in-depth look at a device’s registers of importance (such as several of the
communications status registers). Select a single device from the dropdown and then use the “Read”
command button. The address of each register, hex values, and bit values of each register are provided
here for quick viewing of the device’s status.