Texas Instruments bq2403 Series, User Manual

Page: 13 / 17

www.ti.com
7 Bill of Materials
Bill of Materials
Table 2. Bill of Materials
(1) (2) (3) (4)
COUNT
REFDES DESCRIPTION SIZE MFR PART NUMBER
bq24030 bq24032 bq24035 bq24031
-001 -002 -003 -004
3 3 3 3 C1, C2, C3 Capacitor, ceramic, 10-µF, 6.3-V, X5R, 20% 805 Panasonic ECJ-2FB0J106M
2 2 2 2 C4, C5 Capacitor, ceramic, 10-µF, 25-V, X5R, 20% 1206 Panasonic ECJ-3YB1E106M
1 1 1 1 C6 Capacitor, ceramic, 0.47-µF, 16-V, X7R, 805 Panasonic ECJ-2YB1C474K
10%
0 0 0 0 C7 Capacitor, ceramic, 0.22-µF, 10-V, X5R, 603 Panasonic ECJ-1VB1A224K
10%
0 0 0 0 C8 Capacitor, ceramic, xxx-µF, 10-V, X5R, 10% 603 Panasonic ECJ-1VB1C103K
1 1 1 1 D1 Diode, dual Schottky, 200-mA, 30-V SOT23 Vishay BAT54C
-Liteon
3 3 3 3 D2, D4, D5 Diode, LED, green, 2.1-V, 20-mA, 6-mcd 603 Liteon 160-1183-1-ND
1 1 1 1 D3 Diode, LED, red, 1.8-V, 20-mA, 20-mcd 603 Liteon 160-1181-1-ND
4 4 4 4 J1, J2, J5, Terminal block, 2-pin, 6-A, 3.5 mm 0.27 x 0.25 OST ED1514
J7
1 1 1 1 J3 Terminal block, 4-pin, 6-A, 3.5 mm 0.55 x 0.25 OST ED1516
3 3 3 3 J4, J6, J8 Terminal block, 3-pin, 6-A, 3.5 mm 0.41 x 0.25 OST ED1515
1 1 1 1 J9 Connector, USB upstream (Type B) 0.47 x 0.67 Molex 67068-1000
7 7 7 7 JMP1, Header, 3-pin, 100-mil spacing, 0.10 x 3 Sullins PTC36SAAN
JMP2, (36-pin strip)
JMP3,
JMP4,
JMP5,
JMP6,
JMP7
4 4 4 4 R1, R2, R7, Resistor, Chip, 1.5-k
Ω
, 1/16-W, 1% 603 Std Std
R8
1 1 1 1 R10 Resistor, Chip, 0-
Ω
, 1/16-W, 1% 603 Std Std
1 1 1 1 R11 Resistor, Chip, 22.6-k
Ω
, 1/16-W, 1% 603 Std Std
1 1 1 1 R14 Resistor, Chip, 30.1-k
Ω
, 1/16-W, 1% 603 Std Std
1 1 1 1 R15 Potentiometer, 20-k
Ω
, 1/4 inch Cermet, 0.25
×
0.17 Bourns 3266W-203
12-turn, top-adjust
1 1 1 1 R16 Potentiometer, 50-k
Ω
, 1/4 inch Cermet, 0.25
×
0.17 Bourns 3266W-503
12-turn, top-adjust
3 3 3 3 R3, R4, R5 Resistor, chip, 100-k
Ω
, 1/16-W, 1% 603 Std Std
1 1 1 1 R6 Resistor, chip, 1-k
Ω
, 1/10W, 1% 805 Std Std
1 1 1 1 R9 Resistor, chip, 10-k
Ω
, 1/16-W, 1% 603 Std Std
3 3 3 3 TP1, TP2, Test point, 0.032-inch hole None Void
TP3
1 1 U1 IC, single chip charge and power path QFN TI bq24030RHL
management
1 U1 IC , single chip charge and power path QFN TI bq24032ARHL
management
1 U1 IC , single chip charge and power path QFN TI bq24035RHL
management
1 1 1 1 -- PCB, 2-inch x 2-inch x 0.31-inch Any HPA073
(1)
These assemblies are ESD sensitive, ESD precautions shall be observed.
(2)
These assemblies must be clean and free from flux and all contaminants. Use of no-clean flux is not acceptable.
(3)
These assemblies must comply with workmanship standards IPC-A-610 Class 2.
(4)
Reference designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent
MFR's components.
SLUU207A – October 2004 – Revised January 2007 bq2403x (bqTiny-III™) 1.5-A Single-Chip Li-Ion 13
and Li-Pol Charge Management IC EVM
Submit Documentation Feedback