Hardware Description
15
SWAU106 – January 2019
Copyright © 2019, Texas Instruments Incorporated
CC3135 SimpleLink™ Wi-Fi
®
BoosterPack™ Development Kit (BOOSTXL-
CC3135)
2.7
Performing Conducted Testing
The BoosterPack™ board by default ships with the RF signal connected to the onboard dual band chip
antenna. In addition to the dual band antenna, the board contains two U.FL connectorsthat can be used
for conduct testing, or connect an external antenna. One connector is present for 2.4 GHz only testing,
and another is provided after the diplexer to allow for dual band RF testing. The use of these connectors
requires a rework to be performed, which involves swapping the position of a resistor, as shown in
Figure 10. RF Path on BOOSTXL-CC3135
