Hardware
9
SWRU507 – May 2017
Copyright © 2017, Texas Instruments Incorporated
AWR1443BOOST, AWR1243BOOST (BoosterPack™)
2.3
Power Connections
The BoosterPack is powered by the 5-V power jack (>2.5-A current limit). As soon as the power is
provided, the NRST and 5-V LEDs glow, indicating that the board is powered up (see
).
Figure 5. Power Connector
NOTE:
After the 5-V power supply is provided to the EVM, TI recommends pressing the NRST
switch (SW2) once to ensure a reliable boot up state.
2.4
Connectors
2.4.1
20-Pin BoosterPack™ Connectors
The BoosterPack has the standard LaunchPad connectors (J5 and J6) which enable the BoosterPack to
be directly connected to all TI MCU LaunchPads (see
). While connecting the BoosterPack to other
LaunchPads, ensure the pin 1 orientation is correct by matching the 3V3 and 5-V signal marking on the
boards (see
).
Figure 6. 20-Pin BoosterPack™ Connectors (J5 and J6)
