Evaluating Performance with the ADCPro Software
7.1.1
Plug-in Setup and The Device Config Tab
When the ADS86xxEVM plug-in is first loaded, you must select the device from the Device Selection tab
found in the basic settings window. The ADC options are not available on the plug-in until the device is
selected. Use
for reference.
Figure 9. Device Configuration
After the ADC has been selected, the tabs on the left become available, including the plug-in options to
configure the ADC. The Device Config tab is the default window and includes some of the basic settings
to configure that ADC. Basic information, such as the Plug-in version and Firmware version, is shown here
along with some simple settings use to set up the ADC according to user preferences.
15
SBAU192
–
July 2011
ADS8638EVM-PDK
Copyright
©
2011, Texas Instruments Incorporated
