ADS8350EVM-PDK Kit Operation
3.
Scroll down in the
ADS8350EVM Settings
page and find the
ADS8350 Analog Inputs
connections
descriptions on the GUI. The ADS8350EVM can be driven with a signal generator producing a bipolar
source signal centered on GND or a unipolar signal centered at +V
ref
/ 2. Jumpers JP9 and JP10 are
installed when supporting a bipolar signal centered at GND. Jumpers JP9 and JP10 must be removed
when supporting a unipolar signal source signal centered at 2.5-V.
shows jumpers JP9 and
JP10 on the
ADS8350EVM Settings
page of the GUI.
Figure 19. Bipolar or Unipolar Signal Jumper Settings Description on the GUI
6.4
Capturing Data with the ADS8350EVM-PDK
Access the
Data Monitor
page in the GUI to monitor data acquired by the ADS8350. This GUI page
displays the acquired data versus time. To access the
Data Monitor
page, hover the cursor over the red
arrow at the left center side of the GUI screen; a menu with different GUI pages appear. Click on the
Data
Monitor
option in the menu, as shown in
Figure 20. Open the Data Monitor page on the GUI
18
ADS8350EVM-PDK
SBAU218A – April 2014 – Revised October 2014
Copyright © 2014, Texas Instruments Incorporated