ADS8350EVM-PDK Initial Setup
Figure 6. Bottom View of Simple Capture Card Board with microSD Memory Card Installed
NOTE:
ADS8350EVM-PDK with ADS8350EVM PWB Board revision B (only):
This ADS8350EVM PWB version includes two (2) microSD cards. Ensure both microSD
memory cards are installed in the microSD sockets on the back of the simple capture card
board and on the back of the ADS8350EVM, as shown in
and
respectively.
Figure 7. Bottom View of ADS8350EVM Rev B with microSD Card Installed
The microSD cards are formatted from the factory with the necessary firmware files for the simple capture
card controller board to boot properly. In addition to the simple capture card firmware files (
app
and
MLO
files), the microSD cards contain the ADS8350EVM-PDK software installation files inside the
ADS8350
EVM V#.#.#
folder.
<V#.#.#>
refers to the installation software version number, and increments with
software installer releases.
11
SBAU218A – April 2014 – Revised October 2014
ADS8350EVM-PDK
Copyright © 2014, Texas Instruments Incorporated
