Texas Instruments ADS7853EVM-PDK, User Manual, Page: 29 / 41

www.ti.com
Bill of Materials, PCB Layout, and Schematics
7 Bill of Materials, PCB Layout, and Schematics
Section 7.1 lists the bill of materials. Section 7.2 shows the printed circuit board (PCB) layout for the
ADSxx53EVM. The schematics for the ADSxx53EVM are appended to the end of this user's guide.
7.1 Bill of Materials
NOTE: All components should be compliant with the European Union Restriction on Use of
Hazardous Substances (RoHS) Directive. Some part numbers may be either leaded or
RoHS. Verify that purchased components are RoHS-compliant. (For more information about
TI's position on RoHS compliance, see the
http://www.ti.com .)
Table 7. ADSxx53EVM Bill of Materials
Item No. Qty Ref Des Description Vendor Part Number
C1, C20, C21, C39,
CAP, CERM, 10uF, 16V, +/-10%, X5R,
1 11 C41, C42, C43, Murata GRM21BR61C106KE15L
0805
C44, C45, C46, C54
C2, C5, C9, C10,
CAP, CERM, 1uF, 6.3V, +/-10%, X7R,
2 11 C12, C13, C14, Murata GRM188R70J105KA01D
0603
C15, C28, C30, C40
C3, C4, C18, C19,
3 0 Not installed N/A N/A
C22, C23
R1, R2, R5, R8,
4 0 Not installed N/A N/A
R19, R30
CAP, CERM, 10uF, 6.3V, +/-20%, X5R,
5 4 C6, C26, C27, C51 TDK C1608X5R0J106M
0603
10 C7, C8, C11, C16,
CAP, CERM, 0.1uF, 16V, +/-5%, X7R,
6 C17, C29, C31, AVX 0603YC104JAT2A
0603
C48, C52, C53
7 2 C24, C25 CAP CER 8200PF 50V 5% NP0 0805 TDK C2012C0G1H822J060AA
CAP, CERM, 2.2uF, 16V, +/-10%, X5R,
8 2 C47, C50 Murata GRM188R61C225KE15D
0603
CAP, CERM, 0.22uF, 16V, +/-10%, X5R,
9 1 C49 TDK GRM188R61C224KA88D
0603
NXP
10 1 D1 DIODE ZENER 5.9V 250MW SOT23 PLVA659A.215
Semiconductors
11 2 J1, J2 Connector, TH, SMA TE Connectivity 142-0701-201
On Shore
12 1 J5 2 Terminal Block 3.5MM 2POS PCB ED555/2DS
Technology Inc
SAMTEC, dual-row, right-angle, female,
13 1 J6 SAMTEC ERF8-025-01-L-D-RA-L-TR
latching
Note: Connector Not Installed on PWB Note: Connector Not Installed on
14 1 J7 Rev. A Molex Inc PWB Rev. A
MOLEX connector for microSD card MOLEX 502570-0893
JP1, JP2, JP3, JP4,
Header, TH, 100mil, 2x1, Gold plated,
15 9 JP5, JP6, JP9, SAMTEC TSW-102-07-G-S
230 mil above insulator
JP10, JP11
Header, TH, 100mil, 3x1, Gold plated,
16 3 JP7, JP8, JP12 SAMTEC TSW-103-07-G-S
230 mil above insulator
Panasonic
17 1 R3 RES, 0.22 ohm, 1%, 0.1W, 0603 Electronic ERJ-3RQFR22V
Components
R4, R14, R16, R36,
18 9 R37, R44, R45, RES, 0 ohm, 5%, 0.1W, 0603 Vishay Dale CRCW06030000Z0EA
R89, R90
19 2 R6, R7 RES, 100 ohm, 1%, 0.1W, 0603 Yageo CRCW0603100RFKEA
R9, R15, R39, R40,
20 8 RES, 47.0 ohm, 1%, 0.1W, 0603 Yageo RC0603FR-0747RL
R41, R42, R43, R31
R10, R12, R17,
21 8 R18, R20, R25, RES, 1.00k ohm, 0.1%, 0.1W, 0603 Susumu RG1608P-102-B-T5
R46, R47
22 2 R11, R13 RES, 1.00k ohm, 1%, 0.1W, 0603 Vishay Dale CRCW06031K00FKEA
23 4 R21, R22, R23, R24 RES, 20.0k ohm, 1%, 0.1W, 0603 Vishay Dale CRCW060320K0FKEA
29 SBAU210A – June 2014 – Revised August 2014 ADS8353EVM-PDK and ADS7853EVM-PDK
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated