Overview
4
SBAU284 – January 2017
Copyright © 2017, Texas Instruments Incorporated
ADS58J64 EVM
1.3
Evaluation Board Feature Identification Summary
Figure 1. EVM Feature Locations
1.4
References
•
ADS58J64EVM GUI software, schematics, layout, BOM
•
•
•
•
High-Speed Data Converter Pro User’s Guide
2
Quick Start Guide
This section guides users through the EVM test procedure for obtaining a valid data capture from the
ADS58J64EVM device, using the TSW14J56EVM capture card. This step is the starting point for all
evaluations.
2.1
Software Installation
The proper software must be installed before beginning the evaluation. See
for a list of the
required software.
of this document contains links to the required software on the TI website.
NOTE:
The software must be installed before connecting the ADS58J64EVM and TSW14J56EVM
devices to the computer for the first time.
2.1.1
ADS58J64 GUI Installation
The ADS58J64 GUI is used to control the ADS58J64EVM device. The GUI must be used to properly
configure the devices on the EVM.
1. Download the GUI from ti.com.
NOTE:
For pre-released EVMs, obtain the GUI from the local Field Applications contact.
2. Extract the files from the zip file.
3. Run setup.exe and follow the installation prompts.