![background image](http://html1.mh-extra.com/html/texas-instruments/adpater/adpater_user-manual_1094162028.webp)
PCMCIA Card Recognition
On some TravelMate Pentium products, a PCMCIA Ethernet
card error may occur after DockMate installation. If this
happens, refer to the following sections (Windows 95,
Windows 95 Commercial Upgrade, or Windows for
Workgroups) depending on your operating environment.
Windows 95 (TI-Installed)
The following instructions should clear PCMCIA Ethernet
card problems in a TI-installed Windows 95 environment.
Reconfigure TI Setup
1.
Open the Windows Control Panel and select the
TI
Setup
icon.
2.
Select the
System Configuration
tab and set the
parameter for PCMCIA I/O Addresses to Maximum.
3.
Select the tab marked
Ports-Dock A
.
4.
Select
DockMate
for the Dock Type.
5.
Select
Dock Parallel Port Extended Mode
.
6.
Choose one of the following as the recommended
settings for docking:
❏
SPP is selected as
Standard Parallel Port
❏
ECP and EPP is selected as
Extended Parallel Port
(setting preferred for most users).
7.
Select
OK.
8.
Reboot and proceed to
Reconfigure System Information
.
Reconfigure System Information
1.
Select the
System
icon in the Control Panel.
2.
Select the
Device Manager
tab.
PCMCIA Card Recognition
Troubleshooting Procedures 4-5