![background image](http://html.mh-extra.com/html/texas-instruments/adc12dj3200/adc12dj3200_user-manual_1094811011.webp)
www.ti.com
Open the ADC12DJ3200EVM GUI and Program the ADC and Clocks
11
SLAU701 – May 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
Setup Procedure
Figure 3-2. Configuration GUI EVM Tab
Figure 3-2
and
Figure 3-3
show the GUI open to the
EVM
tab and
Control
tab respectively. Tabs at the
top of the panel organize the configuration into device and EVM features with user-friendly controls and a
low-level tab for directly configuring the registers. The EVM has three configurable devices, namely the
ADC12DJ3200, LMK04828, and LMX2582. The register map for each device is provided in the device
data sheet (
SLVSD97
,
SNAS605
, and
SNAS680
, respectively).
1. Open the ADC12DJxx00EVM GUI.
2. Select the onboard clock as the clock source.
3. Select Fs = 2700 MHz MSPS as the onboard Fs selection.
4. Select JMODE0 for the decimation and serial data mode.
5. Click
Program Clocks and ADC
(Note: This action will overwrite any previous device register settings.)