16
Assembly
The hedge trimmer is fully assembled in the box. Only the battery needs assembly.
Insert the battery
Hold the battery in one hand and insert in the
groove on the back of the product.
Check the battery is properly inserted before
use.
Starting up and how to use
The hedge trimmer is equipped with a two-step safety switch. The machine will only work
when the on/off switch in the handle (1) and on the front handle (2) are activated at the
same time. If one of the switches is released the blade will stop running.
Important work information
When a switch is released a short spark may appear from the engine.
This is not abnormal and should not lead to worries.
The spark is caused by the braking system that is build into the hedge trimmer.
Apart from hedges the hedge trimmer may also be used for cutting bushes.
The best cutting effect is achieved when holding the blade at an angle to the hedge of
approx. 15
°
.
The opposite rotating knives cut on both sides, and it is therefore possible to trim the
hedge in both directions.
2
1
