www.texas.dk
13
4. Collection
1. Mount the top handle (4) with the low han-
dle (5) by the means of nuts and bolts (6).
2. Mount the two handle pipes onto the holes
on the cutting shield.
3. Mount the collection box by pressing the
taps together. Lift up the hatch and mount the
collection box.
4. Mount the two lock pins (A). Check that the
handle tube is tightened well.
5. Height adjustment. Before regulating the
height, the machine must be stopped.
In order to lower the cutting height pull the
height adjustment arm upwards while pressing
down on the top of the engine part. When you
wish to raise the cutting height you shall lift the
engine shield while the adjustment arm is
pushed forward.