Texas Equipment Pro-Trim 600 Operators Instructions & Parts List Download Page 13

  

Safety Instructions: 
When  working  with  the  TEXAS  Pro-Trim  600  the  following  safety  instructions  must  be 
closely  adhered  to.  Always  read  this  manual  carefully  to  understand  each  function  of  the 
machine. Make sure that you, the user of the machine, can stop the machine immediately 
and  switch  off  the  engine  in  case  of  an  accident.  All  instructions  on  safety  and 
maintenance of TEXAS Pro-Trim 600 are worked out for the benefit of the user and should 
therefore be followed without deviations.   

TEXAS Pro-Trim 600 has been constructed as a brushcutter and should be used for this 
exclusive  purpose.  The  machine  can  be  fitted  with  various  pieces  of  original  TEXAS 
tools.  The  supplier  does  not  assume  responsibility  for  accidents  caused  by  the  wrong 
use or running with non-authorised accessories.   

Use only original spare parts for maintenance and repair of your TEXAS Pro-Trim. The 
use of any unauthorised spare parts increases the risk of break-down and unnecessary 
wear and tear.    

The  first  time  the  machine  shall  be  used,  the  dealer  or  other  professional  personnel 
should instruct the user on how to use and operate the machine.   

The person operating the machine is responsible for other persons in the working area. 
Never use the machine when other, especially children or animals, are too close to the 
machine.   

The  machine  can  only  be  lent  to  persons  who  are  familiar  with  the  operation  of  the 
machine.  A  new  user  of  the  machine  must  read  the  instructions  which  must  always 
accompany the machine.   

The  machine  can  only  be  operated  by  persons  who  are  rested,  healthy  and  in  good 
shape.  If  the  work  with  the  machine  is  exhausting  there  must  be  frequent  breaks  to 
avoid  accidents  owing  to  tiredness.  The  machine  must  not  be  operated  by  persons 
under influence of alcohol.  

The  control  units  mounted  by  the  manufacturer,  e.g.  the  connection  lever  and  the 
throttle control, must not be removed or blocked.   

If  the user  at  any time doubts about  the correct  functioning of the machine as regards 
safety, the work must be halted and the machine checked immediately.    

WORK WITH THE MACHINE ON STEEP SLOPES IS DANGEROUS! 

USE THE MACHINE ONLY IN AREAS WHERE IT CAN BE OPERATED SAFELY!  

Contents of the box: 
The TEXAS Pro-Trim is supplied in a cardboard box containing the following: 

One ready-mounted basic unit 
Complete  control  unit  with  upper  handlebar  with  connection  lever,  lower 
handlebar 
One pack of trimmer line, 4.0 mm 
Plastic  bag  with  bolts  for  mounting  of  handlebar,  operator s  instructions.

Summary of Contents for Pro-Trim 600


























Reviews: