Texas Equipment EA 5200, Instruction Manual

Page: 7 / 16

7
Table of content
Warning................................................................. 2
Identification of parts ............................................. 3
Assembling the earth auger .................................. 7
Auger .................................................................... 7
Fuel ....................................................................... 7
Operation .............................................................. 8
Maintenance ......................................................... 8
Storage ................................................................. 9
Troubleshoot ......................................................... 9
Technical Data ...................................................... 9
Spare parts
Parts list and exploded drawings for every product
can be found on our website www.texas.dk If you
can find the part numbers you need, this will
speed up the service. To purchase spare parts,
please contact your dealer.
Assembling the earth auger
Please assemble the earth auger as followed (see
illustration page 3):
1. Mount the auger bit (D) on the output
shaft on the machine unit (A) lock with
bolt and split.
2. Align and adjust the auger (D) on the
adjust bolt (E)
Auger
Fuel

This product is equipped with a two-stroke
engine that demands two-stroke oil added
to the petrol.

Always use unleaded gasoline.

Never use ready-mixed gasoline/oil from
service stations that is normally used for
mopeds, motorbikes, etc.

Always follow the directions of the
supplier for the oil regarding the mix of oil
(see the back of the oil container).

Use a clean and approved petrol can for
mixing the petrol with oil.

Use an approved two-stroke oil for air
cooled engines, chainsaws, trimmers etc.
(Do not use oil for out board engines of
cars. (Mix only small quantities).

Normally 2% oil is mixed with the
gasoline. (50:1) however, always follow
the directions of the manufacturer of the
oil.

Mix the oil and gasoline thoroughly and
shake the can before filling.

Never use a mix of gasoline and oil that is
more than 90 days old as this may lead to
problems when starting the engine. Never
store the same mixture in the tank for
more than 30 days.
Auger
Item number Type Diameter Length
90063092 Soil 100 mm 700 mm
90063093 Soil 150 mm 700 mm
90063094 Soil 200 mm 700 mm
90063095 Soil 200 mm 700 mm
Exten4sion tube
Item number Tube Total length
90063096 400 mm 1100 mm