19
7. Use
Before use, make sure that the battery
is fitted properly with the battery lock in
place.
Then make sure that the chain brake
hand guard is disengaged by pulling it
back. Or else the chain will not move.
To start the chainsaw, first press the main
switch (B), so it lights green.
Then hold the safety switch (C) and
activate both the trigger switch (D).
Stop the chainsaw by releasing the
trigger switch (D).
8. Kickback safety devices
This saw has a low-kickback chain and reduced kickback guide bar.
Both items reduce the chance of kickback. Kickback can still occur with this saw.
The following steps will reduce the risk of kickback.
•
Use both hands to grip saw while saw is running. Use firm grip. Thumbs and fingers
must wrap around saw handles.
•
Keep all safety items in place on saw. Make sure they work properly.
•
Do not overreach or cut above shoulder height.
•
Keep solid footing and balance at all times.
•
Stand slightly to left side of saw. This keeps your body from being in direct line with
chain.
•
Do not let guide bar nose touch anything when chain is moving.
•
Never try cutting through two logs at same time. Only cut one log at a time.
•
Do not bury guide bar nose or try plunge cut (boring into wood using guide bar nose).
•
Watch for shifting of wood or other forces that may pinch chain.
•
Use extreme caution when re-entering a previous cut.
•
Use low-kickback chain and guide bar supplied with this chainsaw.
•
Never use dull or loose chain. Keep chain sharp with proper tension.
