6.
To actuate press, position top platen over one of the bottom platens and depress the black
pushbutton labeled “Start Cycle” located on the handle simultaneously with one of the
black pushbuttons labeled “Start Cycle” located on either side of the swivel head. Machine
will cycle ONLY when the top platen is in position directly over a bottom platen. When
press cycle is in progress, the amber light on the control panel will turn on and remain on
for all but the last two seconds of the timing cycle. At that time, the amber light will go into
a blinking mode to alert the operator that the press cycle is nearly complete.
7.
To immediately open the press, push one of the red “Emergency Release” pushbuttons
located on either side of the swivel head. This safety feature bypasses the timer and
immediately opens the press in case of an emergency. Only one red pushbutton need be
depressed to interrupt cycle. Also, the press should open immediately if the power switch is
turned “OFF” or if the machine power cord is unplugged.
CONVERSION TABLE
GAUGE
PRESSURE
TOTAL INTER-
PLATEN
PRESSURE
LBS. PSI 2” x
4” PLATEN
LBS. PSI 3” x
5” PLATEN
LBS. PSI 4” x
6” PLATEN
LBS. PSI 5” x
6” PLATEN
LBS. PSI 3 ¼” x
5” EXTENDED
ANVIL PLATEN
25
177
22.1
11.8
7.4
5.9
10.9
30
212
26.5
14.1
8.8
7.1
13.0
35
247
30.9
16.5
10.3
8.2
15.2
40
283
35.4
18.9
11.8
9.4
17.4
45
318
39.8
21.2
13.2
10.6
19.6
50
353
44.1
23.5
14.7
11.8
21.7
55
389
48.6
25.9
16.2
13.0
23.9
60
424
53.0
28.3
17.7
14.1
26.1
65
459
57.4
30.6
19.1
15.3
28.2
70
495
61.9
33.0
20.6
16.5
30.5
75
530
66.2
35.3
22.1
17.7
32.6
80
565
70.6
37.7
23.5
18.8
34.8
85
601
75.1
40.1
25.0
20.0
37.0
90
636
79.5
42.4
26.5
21.2
39.1
95
672
84.0
44.8
28.0
22.4
41.4
100
707
88.4
47.1
29.5
23.6
43.5
105
742
92.7
49.5
30.9
24.7
45.7
110
778
97.2
51.9
32.4
25.9
47.9
115
813
101.6
54.2
33.9
27.1
50.0
120
848
106.0
56.5
35.3
28.3
52.2
Table A-1
Maintenance
Drain moisture trap on Air Filter / Regulator as often as necessary.
Check sponge and teflon. Replace if needed.
