During the Wi-Fi connection configuration part, you may be
required to enter the credentials to access the network to
which you wish to connect the VCI
.
The credentials are obtained automatically if the tool is
connecting to the same network as the display unit or to one
of the networks configured in it.
The name of the W-Fi network to connect to is displayed in the upper part of the display (ex:
1234_Wi-Fi).
The following screen indicates that the VCI is connected to the display unit in the desired
mode and is awaiting commands.
As an alternative, the VCI can connect to the display unit in
HOTSPOT
mode, i.e. by creating
its own Wi-Fi network with which it can connect to the display unit.
The following screen indicates that the VCI is connected to the display unit in the desired
mode and is awaiting commands.
For further information, see the software operating manual.
35
en
