13 COMMUNICATION
The VCI communicates with the control units in the vehicle being tested via connection to
the vehicle's diagnostic socket through the specific diagnostic cable indicated by the
software.
The VCI has various communication modes, some of which are reserved for specific types
of diagnosis:
•
WiFi
•
Bluetooth
•
Network cable
•
USB
The communication via RJ45 (Ethernet cable connected to
the DoIP
connector)
is reserved for diagnostic operations via
DoIP
.
The communication between the VCI and the display unit must be configured through the
specific software function before any type of operation on the vehicle.
This function allows configuring all communication modes at once.
Proceed as follows:
1. Power the VCI through the vehicle's diagnostic socket, as described in this manual.
The VCI displays the following screen if no communication modes with the display unit have
been configured.
33
en
