manualshive.com logo in svg

TEXA eTRUCK, Technical Manual, Page: 33 / 36

Share
Download
TEXA eTRUCK Technical Manual Download Page 33

15  BLINK CODES

Starting TEXA eTRUCK by plugging it in (inserting TEXA eTRUCK in the
vehicle's diagnostic socket) and with the vehicle stationary.

LED

Meaning

GREEN - BLUE: quick
alternate blink

Device connected to the vehicle, available for
pairing.

-

Device connected via Bluetooth:

LED

Meaning

BLUE: Slow blink

Device configured and connected to the vehicle.

BLUE: 2 blinks

The device is in one of the following situations:

•

configuration check in progress

•

not configured but connected to the vehicle

•

not configured and not connected

BLUE: Quick blink

Device configured but not connected to the
vehicle.

-

Device NOT connected via Bluetooth:

LED

Meaning

GREEN: Slow blink

Device configured and connected to the vehicle.

GREEN: 2 blinks

The device is in one of the following situations:

•

configuration check in progress

•

not configured but connected to the vehicle

•

not configured and not connected

GREEN: Quick blink

Device configured but not connected to the
vehicle.

Starting TEXA eTRUCK by turning on the engine (device already plugged
in) and with the vehicle stationary.

LED

Meaning

BLUE: 2 blinks

Smartphone authentication successful.

33

en

Summary of Contents for eTRUCK





































Reviews:

No comments