The app gives the possibility to install other devices in sequence or finish the
installations.
11.3 Installation in the Vehicle
A screwdriver may be needed to loosen the screws that fasten the
panels that cover the diagnostic socket.
Make sure the device is securely connected to the diagnostic
socket to avoid it from accidentally disconnecting during use.
Proceed as follows:
1. Turn off the vehicle (instrument panel off).
2. Locate the diagnostic socket.
3. Carefully remove any panel covering the diagnostic socket.
4. Connect the device to the diagnostic socket.
5. Turn on the vehicle (instrument panel on).
6. Carefully reposition any removed panel.
Make sure that the various components around the diagnostic
socket do not damage the device during installation.
Make sure that the position of the device does not interfere with
driving.
Do not start driving before the plastic parts and panels removed are
repositioned correctly.
11.3.1 Installation through 9-pin Deutsch Adapter
The device can also be installed on vehicles with a 9-pin Deutsch socket through
the specific adapter supplied by TEXA S.p.A. (code: 3907794).
24
Summary of Contents for eTRUCK
Page 2: ...2 ...