TPMC872 V1.0 User Manual Issue 1.1
Page 2 of 19
TPMC872-10
One Socket PC Card Interface
, inserted PC
Card accessible through PMC front panel
TPMC872-11
One Socket PC Card Interface
, inserted PC
Card aligned with PMC board border, no front
panel
TPMC872-12
One Socket PC Card Interface
, inserted PC
Card aligned with PMC board border, with PMC
front panel
TPMC872-20
Two Socket PC Card Interface
, inserted PC
Card in first socket accessible through PMC front
panel. The second socket is relegated so that the
inserted card is located behind the PMC board
border.
TPMC872-21
Two Socket PC Card Interface
, inserted card in
first socket is aligned with the PMC board border.
The second socket is relegated so that the
inserted card is located behind the PMC board
border, no PMC front panel.
TPMC872-22
Two Socket PC Card Interface
, inserted card in
first socket is aligned with the PMC board border.
The second socket is relegated so that the
inserted card is located behind the PMC board
border, with PMC front panel.
This document contains information, which is
proprietary to TEWS TECHNOLOGIES GmbH. Any
reproduction without written permission is forbidden.
TEWS TECHNOLOGIES GmbH has made any
effort to ensure that this manual is accurate and
complete. However TEWS TECHNOLOGIES GmbH
reserves the right to change the product described
in this document at any time without notice.
TEWS TECHNOLOGIES GmbH is not liable for any
damage arising out of the application or use of the
device described herein.
Style Conventions
Hexadecimal characters are specified with prefix 0x,
i.e. 0x029E (that means hexadecimal value 029E).
For signals on hardware products, an ‚Active Low’ is
represented by the signal name with # following, i.e.
IP_RESET#.
Access terms are described as:
W Write
Only
R Read
Only
R/W Read/Write
R/C Read/Clear
R/S Read/Set
2004-2006 by TEWS TECHNOLOGIES GmbH
