TPCE260 User Manual Issue 1.0.3
Page 7 of 17
2 Technical Specification
Mechanical and Electrical Interfaces
PCI Express
PCI Express x1, Revision 1.1
Standard Height
Full Length
PCI (PMC Slot)
PCI Mezzanine Card (PMC) Interface conforming to IEEE
P1386/P1386.1
Single Size
PCI Rev. 3.0 compliant
33/66 MHz / 32-Bit PCI
3.3V and 5V PCI Signaling Voltage
PMC Interface
Number of PMC Slots
1
PMC I/O Access
PMC Front Panel I/O
PMC P14 Back I/O through VG64 Right Angle Male Connector
On Board Devices
PCI Express to PCI Bridge
PI7C9X111SL (Pericom)
Physical Data
Power Requirements
250mA typical @ +3.3V DC
50mA typical @ +12V DC
Additional power is required by the PMC Module!
Maximum Power for PMC Slot
TPCE260-1xR:
3 A maximum @ +3.3V DC
2 A maximum @ +5V DC
200 mA maximum @ +12V DC
200 mA maximum @ -12V DC
TPCE260-2xR:
5 A maximum @ +3.3V DC
5 A maximum @ +5V DC
200 mA maximum @ +12V DC
200 mA maximum @ -12V DC
Temperature Range
Operating
Storage
-40°C to +85°C
-40°C to +85°C
MTBF
TPCE260-1xR: 664000 h
TPCE260-2xR: 582000 h
MTBF values shown are based on calculation according to MIL-HDBK-217F and
MIL-HDBK-217F Notice 2; Environment: G
B
20°C.
The MTBF calculation is based on component FIT rates provided by the
component suppliers. If FIT rates are not available, MIL-HDBK-217F and
MIL-HDBK-217F Notice 2 formulas are used for FIT rate calculation.
Humidity
5 – 95 % non-condensing
Weight
TPCE260-1xR: 99 g
TPCE260-2xR: 101 g
Table 2-1 : Technical Specification
