Tews Technologies TIP867 Series, User Manual

Page: 12 / 12

6 Pin Assignment – I/O Connector
Pin Signal Comment Pin Signal Level
1 GND Signal Ground 26 GND Signal Ground
2 DX-_0 Channel 0 Inverting Data I/O 27 DX-_5 Channel 5 Inverting Data I/O
3 DX+_0 Channel 0 Non-inverting Data I/O 28 DX+_5 Channel 5 Non-inverting Data I/O
4 CLK-_0 Channel 0 Inverting CLK I/O
(TIP867-20R only) 29 CLK-_5 Channel 5 Inverting CLK I/O
(TIP867-20R only)
5 CLK+_0 Channel 0 Non-inverting CLK I/O
(TIP867-20R only) 30 CLK+_5 Channel 5 Non-inverting CLK I/O
(TIP867-20R only)
6 GND Signal Ground 31 GND Signal Ground
7 DX-_1 Channel 1 Inverting Data I/O 32 DX-_6 Channel 6 Inverting Data I/O
8 DX+_1 Channel 1 Non-inverting Data I/O 33 DX+_6 Channel 6 Non-inverting Data I/O
9 CLK-_1 Channel 1 Inverting CLK I/O
(TIP867-20R only) 34 CLK-_6 Channel 6 Inverting CLK I/O
(TIP867-20R only)
10 CLK+_1 Channel 1 Non-inverting CLK I/O
(TIP867-20R only) 35 CLK+_6 Channel 6 Non-inverting CLK I/O
(TIP867-20R only)
11 GND Signal Ground 36 GND Signal Ground
12 DX-_2 Channel 2 Inverting Data I/O 37 DX-_7 Channel 7 Inverting Data I/O
13 DX+_2 Channel 2 Non-inverting Data I/O 38 DX+_7 Channel 7 Non-inverting Data I/O
14 CLK-_2 Channel 2 Inverting CLK I/O
(TIP867-20R only) 39 CLK-_7 Channel 7 Inverting CLK I/O
(TIP867-20R only)
15 CLK+_2 Channel 2 Non-inverting CLK I/O
(TIP867-20R only) 40 CLK+_7 Channel 7 Non-inverting CLK I/O
(TIP867-20R only)
16 GND Signal Ground 41 GND Signal Ground for External Termination
17 DX-_3 Channel 3 Inverting Data I/O 42 +5V Power Supply for External Termination
18 DX+_3 Channel 3 Non-inverting Data I/O 43 NC Not connected
19 CLK-_3 Channel 3 Inverting CLK I/O
(TIP867-20R only) 44 NC Not connected
20 CLK+_3 Channel 3 Non-inverting CLK I/O
(TIP867-20R only) 45 NC Not connected
21 GND Signal Ground 46 NC Not connected
22 DX-_4 Channel 4 Inverting Data I/O 47 NC Not connected
23 DX+_4 Channel 4 Non-inverting Data I/O 48 NC Not connected
24 CLK-_4 Channel 4 Inverting CLK I/O
(TIP867-20R only) 49 NC Not connected
25 CLK+_4 Channel 4 Non-inverting CLK I/O
(TIP867-20R only) 50 NC Not connected
Table 6-1 : Pin Assignment I/O Connector
I/O signal level is RS485.
RS485 line termination must be provided externally (e.g. using a transition module).
TIP867 User Manual Issue 1.0.5 Page 12 of 12