PLL 4-Band Receiver Radio MD 81157
13
T
IME
FUNCTIONS
Selecting display mode
You can select the data to be shown on the display
when the radio is switched off.
The selected mode is indicated by corresponding
symbols on the display:
CLOCK DATE CITY
Select the display mode by repeatedly pressing the FINE
button, as shown in the following table.
Alarm function
The PLL 4-Band Receiver Radio has two independent
alarm settings available,
ALARM 1
and
ALARM 2
. For
both, you can set
whether the alarm should sound on every day of the
week or only from Monday to Friday,
whether you are woken by the alarm tone or the
radio.
Setting the alarm time
`
Press
ALARM 1
(
ALARM 2)
. The current time setting
will flash in the display (
0:00 AL1
(
al2
) when first
switched on) and the day of the week indication
(English abbreviation, see above).
`
While the time is still flashing, press the
UP
or
DOWN
button to adjust the time in steps of one
minute. If you hold the button pressed for a few
seconds, the time will change faster, in ten-minute
steps.
Symbol on display
Display mode
CLOCK
only the time is shown
CLOCK + DATE
time and date are shown
CLOCK + CITY
time and world time are
shown
CLOCK + DATE + CITY
time, date and world time
are shown
Weltempfänger_ MD 81157_AUS_manual.fm Seite 13 Freitag, 14. Juli 2006 12:50 12
