5
glich-
pen.
eine
wird
ecker
das
Kin-
spiel
sten
tigen
ffring
rzen,
eifen
Wo-
IMPORTANT: Keep these instructions for future
reference.
teutonia
products combine traditional workmanship
and technical innovations with fashionable design.
teutonia
stands for quality that meets most stringent
requirements. The
teutonia
logo with the rainbow is
your guarantee that this is a genuine
teutonia
model.
Read the instructions carefully before use (especially
our safety notes) and keep them handy for future re-
ference. Your child’s safety may be affected if you do
not follow these instructions.
We are convinced that
by selecting this product you have made a good choice
and your child will be safe in a
teutonia
stroller/pram.
Please contact your dealer should you nevertheless
have reason for complaint.
Your teutonia team
General
The product has been tested in a temperature range
from - 20°C to + 60°C. Please understand that no com-
plaints can be accepted for problems resulting from
incorrect treatment. We are sure that you have made
a good choice with this product and that your child will
feel safe in a teutonia pram. If you nevertheless have
reason for complaint, please contact your dealer.
Your teutonia team
Child Safety
In order to ensure the safety of your child observe the
following points:
●
The maximum permitted load is 25 kg.
●
Only one child may be transported with the PickUp.
●
There must be a means of holding on to the slider.
●
To ensure the stability of the pram the PickUp may
not be used if there is no child in the pram.
●
Only use the PickUp if an adult is holding the pram
by the handle.
●
The PickUp is not certified for the transport of
objects.
●
Before starting a journey check that the PickUp has
been fastened correctly.
●
The PickUp may only be fastened on the handle
side.
●
Never leave your children unattanded. Never make
any modifications that may affect the safety of your
child.
●
Please note that using a pushchair or a stroller for
purposes that are not typical (e.g. jogging, running,
skating, etc.) may be dangerous and that such use
requires you to take very special care.
Assembling the Wheels
Attach the wheels of the
PickUp by actuating the
locking springs 1. on the
wheel hub and placing the
wheel on the axle. Make
sure that the wheel has
engaged correctly.
Assembling the Ball
The ball
2.
to attach the
PickUp to the pram is
made up of two halves.
Separate the two halves
of the ball and remove
the retention sleeves.
Place the retention
sleeves, which protect
the pram axles, centrally
around the pram axle
and protective tube
3.
In the case of prams with
a swivel device, the ball can be mounted on either
side. Put the two halves of the ball together over the
retention sleeves and fasten them with the enclosed
screws. Make sure that the ball is sitting firmly on
the axle and does not slip in order to ensure opti-
mum travel comfort. To remove the ball, proceed in
reverse order. If the PickUp is not used you do not
need to remove the ball.
Attaching the Footrest
After you have attached
the ball to the pram, pull
back the red operating le-
ver
4.
and at the same
time place the footrest
5.
on the ball. When you re-
lease the operating lever,
the footrest is automati-
cally fixed.
