TEUPEN LEO 27T, Translation Of The Operating Instructions

Page: 111 / 312

Operation
07/05/2018 111
7.11 Adjusting and operating the outriggers for bracing
Personnel:
n
Trained persons
Protective equipment:
n Occupational safety clothing
n
Safety boots
n Safety helmet
1. Switch on the machine ( Ä Chapter 7.3 „Switching the machine on/off”, on page
73).
2. Move the working basket into the work position (
Ä
Chapter 7.8 „Moving the
working basket into the work position (optional)”, on page 98).
3. Move the desired outrigger(s) into transport position, wide work position or nar-
row work position ( Ä Chapter 7.9 „Moving the bracing into the work position”,
on page 101).
3 4 2 1
5 6
Fig. 135
4. Set the function selector to [bracing function] (yellow) (Fig.135/6).
WARNING
Risk of material damage due to improper use of the collision
button!
When adjusting the outriggers manually, you need to keep the collision button
pressed to enable movements. This can cause substantial damage to the machine!
– Make sure that no machine parts can be damaged during any movements.
– If there is a risk of collision, immediately release the collision button.