TEUPEN LEO 21GT, Manual

Page: 309 / 356

13 PERIODIC SERVICE
ENGLISH
ENGINE OIL
To avoid personal injury:
A
Be sure to stop the engine before checking and
changing the engine oil and the oil filter
cartridge.
A
Do not touch muffler or exhaust pipes while
they are hot; Severe burns could result. Always
stop the engine and allow it to cool before
conducting inspections, maintenance, or for a
cleaning procedure.
A
Contact with engine oil can damage your skin.
Put on gloves when using engine oil. If you
come in contact with engine oil, wash it off
immediately.
A
Be sure to inspect the engine, locating it on a
horizontal place. If placed on gradients accurately, oil
quantity may not be measured.
A
Be sure to keep the oil level between upper and lower
limits of the oil gauge. Too much oil may cause a drop
in output or excessive blow-by gas. On the closed
breather type engine in which mist is sucked through
port, too much oil may cause oil hammer. While too
little oil, may seize the engine's rotating and sliding
parts. (The closed breather is an option.)
B
Checking level and adding engine oil
1. Check the engine oil level before starting or more than
5 minutes after stopping the engine.
2. Remove the oil level gauge, wipe it clean and reinstall
it.
3. Take the oil level gauge out again, and check the oil
level.
(1) O ring
(2) Filter element
(3) Spring
(4) Filter bowl
(5) Screw ring
(1) Oil filler plug
(2) Oil level gauge [Lower end of oil level gauge]
(A):Engine oil level within this
range is proper.
www.delpin.dk