• T 1000 SW / T 2000 SW
7
Setup and connection
Setup notes
• Select a stable, level base.
• Make sure that the environment is clean and free from dust.
• Avoid placing the unit close to sources of heat or in
direct sunlight.
• Arrange the connector cables so that they do not pose
a trip hazard.
• Do not place any heavy objects on the cables or the
speakers.
• The location of the subwoofer can be freely selected
and does not infl uence the other speakers. However,
do not place it in the corner of the room as this may
result in irregular frequency overloads. A location
between the front speakers is often ideal.
• The enclosed rubber feet are affi xed to all four corners
on the base plate of the subwoofer in order to avoid
interference associated with vibrations.
Connection
Audio connection
You will need a mono RCA connector cable for the
audio connection of the subwoofer. With this cable you
connect one of the RCA jacks
1
“In” on the back side of
the subwoofer to the RCA jack “Subwoofer Out” on your
AV receiver. You will fi nd more information on this in the
operating instructions of your receiver.
Connecting to a power supply
Danger
Check the mains voltage!
Be absolutely sure to check whether
the switch for the mains voltage
10
is set to the right voltage!
The switch
10
has two settings:
•
230
(220–240 V) for Germany and Europe
•
115
(110–120 V) for North America
The selected setting is indicated in a white font on the
red plastic slider of the switch. If you are unsure, ask your
public utility for the network voltage.
• If necessary, set the correct mains voltage using the
switch
10
.
• Ensure that the mains switch
9
“Power” is switched off
(“0 OFF” position).
• Turn the volume on the subwoofer to approx. one third
power using the “Volume” control
3
.
• Connect the mains connector jack
11
with a mains
socket using the mains cord
햳
.
• Also plug the mains plug of your AV receiver back into
the socket.
Activating and deactivating
• With the switch
9
“Power” you can turn the power
supply on or off. When the subwoofer is activated, the
power LED
4
“Power” is green. If the subwoofer is in
standby, it is red.
Subwoofer
T 1000 SW /
T 2000 SW
Screen
Stereo triangle
Center
Rear
Rear
Front
Center
Front
9
10
11
1
Mono RCA cable
91830 GB 20110519.indd 7
91830 GB 20110519.indd 7
19.05.11 08:17
19.05.11 08:17
