Teufel System 9 THX Ultra 2 Technical Specifications And Operating Manual Download Page 9

9

Teufel 

· 

System 9 THX

® 

Ultra 2

Speaker positions in the 5.1 configuration

General notes on speaker placement

Thanks to its elegant design, the Teufel System 9 
THX

®

 Ultra 2 loudspeaker set will easily blend into 

your living room. In order to get the best possible 
audio  quality  from  your  Teufel  system,  however, 
there are a number of speaker placement rules to 
consider; these apply particularly to home thea-
tre use.

As a general guideline, any home theatre system 
should be concentrated around the viewing area, 
i.e., that part of the room that contains the TV/
screen and the main seating spots. If at all pos-
sible, the TV/screen should be placed centrally in 
relation to the viewing/listening spots. 

Our speaker placement suggestions, shown over 
the next pages, are designed for the best possible 
multi-channel sound reproduction in your home. 
In the reality of your living room, of course, there 
may  be  factors  working  against  the  suggested 
placements.  While  our  recommendations  repre-
sent the audio purist's optimum layout, modern 
AV  receivers  also  offer  a  number  of  options  to 
electronically  compensate  for  compromises  in 
speaker placement. Always remember: 
Our  recommendations  are  not  the  be-all-and-
end-all  but  a  starting  point.  Ultimately,  you  will 
know best what works in your room, both visually 
and sonically. Trust your eyes – and your ears! 

Centre 

The  centre  speaker  reproduces  virtually  all 
spoken  sound,  including  most  dialogue.  In  rela-
tion  to  the  main  listening  spot,  place  it  cen-
trally under or above the TV/screen. If you need 
to  position  the  centre  speaker  (M  950  FCR) 
lower than 40 cm or higher than 1.20 m, angle it 
horizontally towards the listening spot. 

Front 

The front speakers should be positioned the same 
way as any conventional stereo speakers – form-
ing  an  equilateral  triangle  with  the  listener.  In 
a  home  theatre  setup,  the  left  and  right  front 
speakers should be equidistant to the TV/screen, 
mounted  on  the  wall  or  on  speaker  stands.  The 
Teufel  M  950  FCR  satellite  speakers  are  best 
mounted  on  Teufel's  speaker  stands (to  be  pur-
chased separately). For this purpose, they provide 
an M6 packing screw on the base of the cabinet, 
which  is  used  for  fastening  the  cabinet  to  the 
stand.  Speaker  stands  ensure  that  the  satellite 
speakers are placed at the best possible height. 

If  you  mount  the  speakers  on  the  wall  or  on  a 
bookshelf,  make  sure  the  speaker  height  is  be-
tween 40 cm and 1.20 m. If these recommended 
values  are  not  practical  in  your  listening  envi-
ronment and you need to position the speakers 
higher  or  lower,  you  should  angle  them  towards 
the listening spot. 

Finally, make sure that the centre speaker and the 
two  front  speakers  are  positioned  in  a  straight 
line, or on a slight arc with the TV/screen. If the 
distances  between  you  and  the  speakers  vary 
significantly, this will degrade the audio signal's 
spatial imaging. 
Make sure to align your speakers properly so they 
sound as good as possible.

Subwoofer

At  the  recommended  crossover  frequency  of 
80  Hz,  the  subwoofer  can  be  positioned  in  the 
room  very  flexibly  without  affecting  the  output 
from the other loudspeakers. The ideal position is 
somewhere along the axis between the two front 
speakers, but you should feel free to experiment 
with  placing  it  anywhere  you  like.  For  practical 
purposes,  there  should  be  no  obstructions  be-
tween the front of the subwoofer (speaker grille) 
and  the  listener;  this  way,  the  infrared  remote 
control  can  be  used  directly  from  the  listening 
spot.

We recommend 

you place the subwoofer 

somewhere in the 

grey front area.

SW

Centre

Front

Front

Summary of Contents for System 9 THX Ultra 2

















Reviews: