• System 10 THX Ultra 2
7
The brackets on the back side (see graphic) are used for
mounting the rear speakers on a wall.
Threaded holes are located on the bottom side for mount-
ing the front speakers on a speaker stand.
You can purchase mounting materials specially designed
for these speakers (cords, speaker stands and resonance
dampers) in our webshop (www.teufelaudio.com) in the
“Accessories” area.
In order to operate the remote control, you will need two
type AAA micro batteries with 1.5 volt (included in the
product contents.
Inserting batteries
• Push the small lever on the cover of the battery com-
partment on the back of the remote control and remove
the lid by lifting it off upwards.
• If applicable, remove any old batteries (please observe
the notes on page 14).
• Insert the batteries in the battery compartment as
shown in the figure.
• Place the cover back on the compartment and push it
closed.
Remote control
Assembly
Functionality
The remote control transmits infrared control signals. To
do so, it is necessary that you point the remote control
towards the front of the subwoofer. Ensure that no objects
are in the way of the infrared signal.
Cover grill
The cover grills protect the sensitive speaker membranes
and do not affect the sound. Depending on your taste,
you can simply pull the grids off to the front and then put
them back on the same way.
